Handwe Type 2 to Type 1 EV Adapter 16A 32A

Why are there EV Adapters? 

This usually happened in Mode 3 charging, Because currently there are main two standards in the world SAE J1772(USA) and IEC 62196-2(Europe), when our car charging inlet standard is different from our local charging station connector standard, we will encounter trouble, because they are two different ports and incompatible completely , then Handwe EV Adapter is born to solve this problem.

Technical Data:

Standards: IEC 62196-2 type 2 to type 1 J1772 adapter 

Rated Voltage: 110V - 250V

Operating Voltage: 110V - 250V

Current: 16A/32A 

Customized: ok

Warranty: 24 month

Certificate: TUV - CE 

IP Grade: IP 54

Withstand Voltage: 2000V

Operating Temperature: -25ºC~50ºC

Size: 15cm*6cm*6cm

How to use type 1 to type 2 adapter?

1.Plug in the Type 1 end of the adapter to the station charging port;

2.Plug in the Type 2 end of the adapter to the Type 2 car charging port;

3.After the adapter has clicked in place you are ready for the charge;

4.Disconnect the vehicle side first and then the charging station side;

5.Remove the adapter from the charging station when not in use.